Shop
Showing 1–15 of 33 results
-
Gammaflux Hot Runner Temperature Controllers
Gammaflux LEC Hot Runner Temperature Controllers from 1 to 24 zones
Designed for smaller hot runner system applications, the LEC is offered with 2, 6 and 12 zone enclosures. A network module allows you to link two 6 or 12 zone enclosures together for up to 24 zones of control. The LEC features a modular design for simple control card removal, addition or replacement.
SKU: n/a -
Gammaflux Hot Runner Temperature Controllers
Gammaflux G24 Hot Runner Temperature Controllers from 12 to 480 zones
Focused on the plastics industry, Gammaflux is an expert in process optimisation. The G24 is everything you would expect in a next generation control system:
- Easier to Use (New Mold Wizard)
- Less Expensive
- Smaller
- Faster
- More Flexible/Standardisation
- Improved Interlocks
- Mold Doctor®
- Early Material/Plastic Leak Detection
- 5 Year Warranty
SKU: n/a -
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem ACE – Adiabatic Cooler
ACE (Adiabatic Cooling Energy) is an adiabatic dry cooler which uses ambient air to cool process water.
By using powerful fans, placed into the ACE, the ambient air is conveyed through a PVC screen evaporator uniformly moisturised by a patented “SHOWER” anti-scaling water distribution system. By permeating through the water-soaked cavities of the evaporating panel, the air cools down releases heat to the water, which evaporates. This process results in ACE achieving a higher efficiency compared to the traditional dry cooler while maintaining unchanged the water consumption and contamination requirements of closed-circuit systems.
SKU: n/a -
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem DC – Dry Cooler
The DRY COOLERS have the advantage of being able to operate without water consumption eliminating all the typical problems of traditional cooling towers because the system works in closed circuit, without losing control in efficiency.
All DC systems can be included into existing systems and controlled by a new generation microprocessor that also allows the insertion of a modulating threeway valve on the system for further savings.
SKU: n/a -
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem HC – Thermo-refrigerator
Frigosystem’s thermo-refrigerator HC is a brilliant, compact, all-in-one solution which integrates in onenmonobloc unit, either the cooling process and the thermoregulation for any industrial application. A dual function within the same machine with remarkable advantages like:
- temperature accuracy
- pressure constancy of the fluid to the utility
- productivity increase
- energy saving
- decreased maintenance costs
- reduced footprint beside the main process machine.
SKU: n/a -
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem I-RES – Cooled Chiller with Magnetic Levitation
Resulting from Frigosystem’s experience in using magnetic levitation technology in process cooling industries, I-RES chillers, and air and water condensed chillers, are the most efficient and reliable solution. Available cooling power up to 4700 kW with several combinations of compressors sizes. The efficiency of this series has no comparisons: in the water-condensed versions, a SEPR index of 12.04 is achieved.
SKU: n/a -
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem KITE – Air Cooler
KITE is the solution “ALL IN ONE”, it is a mono-block solution where, in the same unit, there are:
- ring cooling (single or double), IBC and gauge control
- thermoregulated water between 7 and 25 ºC to extruder, torque motors, drawing device and other utilities.
With this solution, installation and connection costs, floor space and maintenance costs are significantly reduced. Energy consumption is also optimised.
SKU: n/a -
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem NATU-RA
Natu-RA series offer reliability, precision and efficiency starting from the smallest cooling powers.
The new generation condenser, combined with the ecological gas R410-A and an evolved microprocessor, guarantee SEPR efficiency according to the latest European regulations.
Main characteristics:
- Ecological refrigerant gas R-410A
- Customisable hydronic group: standard version with integrated tank and process pump
- Water circuit with thermal insulation
- Automatic filling
- Large condenser with generous fin spacing for reduced soiling and ease of maintenance
- Designed for installation indoors or outdoors
- Maximum ambient temperature 45°C
- Removable side panels for easy access and maintenance
- Control panel complete with associated control equipment with digital microprocessor control for
set and actual temperatures and safety alarms - User-friendly LCD display with graphic and textual symbols of all functions
- Interface and supervision with the evolved FS i-Link system
SKU: n/a
-
Gammaflux Hot Runner Temperature Controllers
Gammaflux LEC Hot Runner Temperature Controllers from 1 to 24 zones
Designed for smaller hot runner system applications, the LEC is offered with 2, 6 and 12 zone enclosures. A network module allows you to link two 6 or 12 zone enclosures together for up to 24 zones of control. The LEC features a modular design for simple control card removal, addition or replacement.
-
Gammaflux Hot Runner Temperature Controllers
Gammaflux G24 Hot Runner Temperature Controllers from 12 to 480 zones
Focused on the plastics industry, Gammaflux is an expert in process optimisation. The G24 is everything you would expect in a next generation control system:
- Easier to Use (New Mold Wizard)
- Less Expensive
- Smaller
- Faster
- More Flexible/Standardisation
- Improved Interlocks
- Mold Doctor®
- Early Material/Plastic Leak Detection
- 5 Year Warranty
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem ACE – Adiabatic Cooler
ACE (Adiabatic Cooling Energy) is an adiabatic dry cooler which uses ambient air to cool process water.
By using powerful fans, placed into the ACE, the ambient air is conveyed through a PVC screen evaporator uniformly moisturised by a patented “SHOWER” anti-scaling water distribution system. By permeating through the water-soaked cavities of the evaporating panel, the air cools down releases heat to the water, which evaporates. This process results in ACE achieving a higher efficiency compared to the traditional dry cooler while maintaining unchanged the water consumption and contamination requirements of closed-circuit systems.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem DC – Dry Cooler
The DRY COOLERS have the advantage of being able to operate without water consumption eliminating all the typical problems of traditional cooling towers because the system works in closed circuit, without losing control in efficiency.
All DC systems can be included into existing systems and controlled by a new generation microprocessor that also allows the insertion of a modulating threeway valve on the system for further savings.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem HC – Thermo-refrigerator
Frigosystem’s thermo-refrigerator HC is a brilliant, compact, all-in-one solution which integrates in onenmonobloc unit, either the cooling process and the thermoregulation for any industrial application. A dual function within the same machine with remarkable advantages like:
- temperature accuracy
- pressure constancy of the fluid to the utility
- productivity increase
- energy saving
- decreased maintenance costs
- reduced footprint beside the main process machine.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem I-RES – Cooled Chiller with Magnetic Levitation
Resulting from Frigosystem’s experience in using magnetic levitation technology in process cooling industries, I-RES chillers, and air and water condensed chillers, are the most efficient and reliable solution. Available cooling power up to 4700 kW with several combinations of compressors sizes. The efficiency of this series has no comparisons: in the water-condensed versions, a SEPR index of 12.04 is achieved.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem KITE – Air Cooler
KITE is the solution “ALL IN ONE”, it is a mono-block solution where, in the same unit, there are:
- ring cooling (single or double), IBC and gauge control
- thermoregulated water between 7 and 25 ºC to extruder, torque motors, drawing device and other utilities.
With this solution, installation and connection costs, floor space and maintenance costs are significantly reduced. Energy consumption is also optimised.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem NATU-RA
Natu-RA series offer reliability, precision and efficiency starting from the smallest cooling powers.
The new generation condenser, combined with the ecological gas R410-A and an evolved microprocessor, guarantee SEPR efficiency according to the latest European regulations.
Main characteristics:
- Ecological refrigerant gas R-410A
- Customisable hydronic group: standard version with integrated tank and process pump
- Water circuit with thermal insulation
- Automatic filling
- Large condenser with generous fin spacing for reduced soiling and ease of maintenance
- Designed for installation indoors or outdoors
- Maximum ambient temperature 45°C
- Removable side panels for easy access and maintenance
- Control panel complete with associated control equipment with digital microprocessor control for
set and actual temperatures and safety alarms - User-friendly LCD display with graphic and textual symbols of all functions
- Interface and supervision with the evolved FS i-Link system
-
Gammaflux Hot Runner Temperature Controllers
Gammaflux LEC Hot Runner Temperature Controllers from 1 to 24 zones
Designed for smaller hot runner system applications, the LEC is offered with 2, 6 and 12 zone enclosures. A network module allows you to link two 6 or 12 zone enclosures together for up to 24 zones of control. The LEC features a modular design for simple control card removal, addition or replacement.
-
Gammaflux Hot Runner Temperature Controllers
Gammaflux G24 Hot Runner Temperature Controllers from 12 to 480 zones
Focused on the plastics industry, Gammaflux is an expert in process optimisation. The G24 is everything you would expect in a next generation control system:
- Easier to Use (New Mold Wizard)
- Less Expensive
- Smaller
- Faster
- More Flexible/Standardisation
- Improved Interlocks
- Mold Doctor®
- Early Material/Plastic Leak Detection
- 5 Year Warranty
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem ACE – Adiabatic Cooler
ACE (Adiabatic Cooling Energy) is an adiabatic dry cooler which uses ambient air to cool process water.
By using powerful fans, placed into the ACE, the ambient air is conveyed through a PVC screen evaporator uniformly moisturised by a patented “SHOWER” anti-scaling water distribution system. By permeating through the water-soaked cavities of the evaporating panel, the air cools down releases heat to the water, which evaporates. This process results in ACE achieving a higher efficiency compared to the traditional dry cooler while maintaining unchanged the water consumption and contamination requirements of closed-circuit systems.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem DC – Dry Cooler
The DRY COOLERS have the advantage of being able to operate without water consumption eliminating all the typical problems of traditional cooling towers because the system works in closed circuit, without losing control in efficiency.
All DC systems can be included into existing systems and controlled by a new generation microprocessor that also allows the insertion of a modulating threeway valve on the system for further savings.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem HC – Thermo-refrigerator
Frigosystem’s thermo-refrigerator HC is a brilliant, compact, all-in-one solution which integrates in onenmonobloc unit, either the cooling process and the thermoregulation for any industrial application. A dual function within the same machine with remarkable advantages like:
- temperature accuracy
- pressure constancy of the fluid to the utility
- productivity increase
- energy saving
- decreased maintenance costs
- reduced footprint beside the main process machine.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem I-RES – Cooled Chiller with Magnetic Levitation
Resulting from Frigosystem’s experience in using magnetic levitation technology in process cooling industries, I-RES chillers, and air and water condensed chillers, are the most efficient and reliable solution. Available cooling power up to 4700 kW with several combinations of compressors sizes. The efficiency of this series has no comparisons: in the water-condensed versions, a SEPR index of 12.04 is achieved.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem KITE – Air Cooler
KITE is the solution “ALL IN ONE”, it is a mono-block solution where, in the same unit, there are:
- ring cooling (single or double), IBC and gauge control
- thermoregulated water between 7 and 25 ºC to extruder, torque motors, drawing device and other utilities.
With this solution, installation and connection costs, floor space and maintenance costs are significantly reduced. Energy consumption is also optimised.
-
Frigosystem Industrial Chilling & Cooling Solutions
Frigosystem NATU-RA
Natu-RA series offer reliability, precision and efficiency starting from the smallest cooling powers.
The new generation condenser, combined with the ecological gas R410-A and an evolved microprocessor, guarantee SEPR efficiency according to the latest European regulations.
Main characteristics:
- Ecological refrigerant gas R-410A
- Customisable hydronic group: standard version with integrated tank and process pump
- Water circuit with thermal insulation
- Automatic filling
- Large condenser with generous fin spacing for reduced soiling and ease of maintenance
- Designed for installation indoors or outdoors
- Maximum ambient temperature 45°C
- Removable side panels for easy access and maintenance
- Control panel complete with associated control equipment with digital microprocessor control for
set and actual temperatures and safety alarms - User-friendly LCD display with graphic and textual symbols of all functions
- Interface and supervision with the evolved FS i-Link system